design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. plastic film capacitors 1 2 3 4 5 6 7 8 9 11 12 e c p u 1 c 5 a product code dielectric & construction suf?x rated voltage capacitance suf?x code 5 tape width 8 mm cap. tol. 1c 16 v.dc 10 m element (stacked) outer electrode l0.2 w0.20 h0.2 e0.30 (0.25) e0.30 (0.25) g ? ? ? to be applied only for size code j1 low esr max. capacitance values 1.0 f smallest package size in ? lm capacitors 3225/1.0 f for re? ow soldering rohs directive compliant noise suppressor coupling stacked dielectric and inner electrode with simple mold - less construction features stacked metallized plastic film chip capacitor type : ecpu(a) category temp. range (including temperature-rise on unit surface) C 40 c to +85 c rated voltage 16 v.dc capacitance range 0.10 f to 1.0 f (e6) capacitance tolerance 20 %(m) dissipation factor (tan d ) tan d < 1.5 % ( 20 c, 1 khz ) withstand voltage between terminals : rated volt (v.dc) 150 %, 60 s insulation resistance (ir) c < 0.33 f : ir > 1000 m (20 c, 10 v.dc, 60 s) c > 0.33 f : ir > 300 m ? f (20 c, 10 v.dc, 60 s) soldering conditions re? ow soldering : 240 c max. and 30 sec max. at more than 220 c (temp. at capacitor surface) ? in case of applying voltage in alternating current (50 hz or 60 hz sine wave) to a capacitor with dc rated voltage, please refer to the page of permissible voltage (r.m.s) in alternating current corresponding to dc rated voltage. size code lwhe g j1 2.0 1.25 1.0 0.45 > 0.6 h1 3.2 1.6 0.8 0.65 > 1.0 h2 3.2 1.6 1.0 0.65 > 1.0 h3 3.2 1.6 1.4 0.65 > 1.0 g2 3.2 2.5 1.4 0.65 > 1.0 unit : mm construction dimensions recommended applications explanation of part number specifi cations feb. 2016 01
design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. plastic film capacitors land electrode c a b refer to the page of taping speci? cations taping specifi cation for automatic mounting capacitance (f) rated voltage 16 v.dc part no. dimensions (mm) size code q'ty lwh 0.10 ecpu1c104ma5 2.0 1.25 1.0 j1 3000 0.15 ecpu1c154ma5 3.2 1.6 0.8 h1 0.22 ecpu1c224ma5 3.2 1.6 0.8 h1 0.33 ecpu1c334ma5 3.2 1.6 1.0 h2 0.47 ecpu1c474ma5 3.2 1.6 1.4 h3 2000 0.68 ecpu1c684ma5 3.2 1.6 1.4 h3 1.0 ecpu1c105ma5 3.2 2.5 1.4 g2 size code land dimensions re? ow soldering abc j1 0.8 2.4 1.1 h1 1.8 3.6 1.4 h2 1.8 3.6 1.4 h3 1.8 3.6 1.4 g2 1.8 3.6 2.3 ? lt is not warrantable that you can mount the capacitor without trouble under all the mounting condition when recommender for l and dimensions is adopted. unit : mm recommended for land dimensions rating dimensions quantity feb. 2016 01
|